Switch the page to the edit mode
Insert the Table Transformer macro and paste the table/s or the macros outputting tables within the macro body
Select the macro and click Edit
Select ChartGPT assistant tab
Ask the assistant to write the SQL query according to your needs
Check the result via the Preview window
Find here how to enable/disable the AI assistant feature. |
|
Use case:
You have a table with the stationary orders. You need to output a new column in the table with the order priority according to the total sum of money: less than $1000 is Low, from $1000 to $2000 is Medium, and more than $2000 is High.
Solution:
Enter the following SQL query:
SELECT *, CASE WHEN 'Subtotal' < 1000 THEN "LOW" WHEN 'Subtotal' >= 1000 AND 'Subtotal' < 2000 THEN "MEDIUM" ELSE "HIGH" END AS 'Priority' FROM T1 |
CASE WHEN ... THEN ... ELSE ... END goes through conditions and return a value when the first condition is met.
AS '...' outputs a new 'Priority' column.If you want to replace the words Low, Medium and High by prominent statuses using the default Status macro or the Handy Status macro, just place a one-column table containing each status and the same column label in the macro body. Don't change anything in the SQL query. |
You can use FORMATWIKI function to insert statuses into a table. |
|
Use case:
You have a table with two columns: Target date and Completion date. You need to compare and rate these dates:
Solution:
Enter the following SQL query:
SELECT *, CASE WHEN (('Completion date' - 'Target date') / "24h") < 5 THEN "ON TIME" WHEN (('Completion date' - 'Target date') / "24h") > 5 AND (('Completion date' - 'Target date') / "24h") <= 10 THEN "LATE" ELSE "VERY LATE" END AS 'Rating' FROM T1 |
You can use FORMATWIKI function to insert statuses into a table. |
|
Use case:
You have a table with the number of added lines of code and the number of defects. You need to calculate the quality of the code. The number of defects less than one defect per 10 lines indicates the good quality of the code. Otherwise the quality of the code is bad.
Solution:
Enter the following SQL query:
SELECT *, ( 'Number of defects' * 10 / 'Lines of code added' ) AS 'Defects per 10 lines', CASE WHEN ( 'Number of defects' * 10 / 'Lines of code added' ) < 1 THEN "Good" ELSE "Bad" END AS 'Code quality' FROM T1 |
('...' * 10 / '...') AS '...' calculates the number of defects per 10 lines of code and outputs the 'Defects per 10 lines' column.
CASE WHEN ... THEN ... ELSE ... END AS '...' goes through conditions and return a value when the first condition is met and outputs the 'Code quality' column.You can use FORMATWIKI function for the purposes of cell formatting. |
|
You can merge two columns containing text with the help of formulas:
|
|
Use case:
You have two tables where the columns differ.
You need to merge two tables where the entrys meet the conditions:
Solution:
Enter the following SQL query:
SELECT * FROM T1 JOIN T2 ON T1.'Transaction ID' = T2.'Transaction ID' WHERE ( 'Transaction Date' >= "10 / 1 / 2018" AND 'Transaction Date' < "11 / 1 / 2018" ) AND ( 'Customer Type' = "Business" ) |
WHERE ('...' >= "10/1/2018" AND '...' < "11/1/2018") AND ('...' = "...") extracts only those records that fulfill a specified condition.
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Use case:
You have a table containing a period of time (start date and end date).
You need to count the number of workdays during this time period.
Advanced use case:
You have an additional table with national holidays which you also shouldn't consider as workdays.
Solution:
Enter the following SQL query:
SELECT *, 'Days' - 2 * (('Days' / 7)::integer) - CASE WHEN 'Days' % 7 = 0 THEN 0 WHEN 'Start date'::Date->getDay() = 0 THEN 1 WHEN 'Start date'::Date->getDay() + 'Days' % 7 = 7 THEN 1 WHEN 'Start date'::Date->getDay() + 'Days' % 7 > 7 THEN 2 ELSE 0 END AS 'Work days' FROM (SELECT *, ROUND((T1.'End date' - T1.'Start date') / "1d") + 1 AS 'Days' FROM T1) |
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Solution for the advanced use case:
Enter the following SQL query:
SELECT *, 'Days' - 2 * (('Days' / 7)::integer) - CASE WHEN 'Days' % 7 = 0 THEN 0 WHEN 'Start date'::Date->getDay() = 0 THEN 1 WHEN 'Start date'::Date->getDay() + 'Days' % 7 = 7 THEN 1 WHEN 'Start date'::Date->getDay() + 'Days' % 7 > 7 THEN 2 ELSE 0 END - (SELECT COUNT(*) FROM (SELECT *,'Holiday'::Date->getDay() AS 'Day' FROM T2) WHERE 'Holiday' >= TT.'Start date' AND 'Holiday' <= TT.'End date' AND 'Day' > 0 AND 'Day' < 6) AS 'Work days' FROM (SELECT *, ROUND(('End date' - 'Start date') / "1d") + 1 AS 'Days' FROM T1) AS TT |
Use case:
You have a table (a pivot table) containing a sequence of years and some numeric values.
You need to calculate cumulative (running) totals when the value of each next year is added to the sum of the previous ones.
Solution:
Enter the following SQL query:
SELECT 'Year', SUM (TT2.'Requests') AS 'Requests' FROM T1 AS TT1 JOIN T1 AS TT2 on TT1.'Year' >= TT2.'Year' GROUP BY TT1.'Year' ORDER BY TT1.'Year' |
|
|
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Use case:
You have a table (a macro outputting a table) containing a set of numeric values.
You need to calculate the standard deviation or variance.
Solution:
Enter the following SQL query (select the functions depending on what you'd like to calculate):
SELECT MEDIAN(T1.'Value') AS 'Median', STDDEV(T1.'Value') AS 'Standard deviation population', STDEV(T1.'Value') AS 'Standard deviation sample', VAR(T1.'Value') AS 'Variance sample', VARP(T1.'Value') AS 'Variance population' FROM T1 |
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Use case:
You have two tables containing information about employees on different pages.
The first table is an Excel spreadsheet with data.
You need to fill in the blanks or update values in the second table with data from the first one by matching the 'Employee' columns.
Advanced use case:
You need to select values manually (without column matching) and add them into empty cells only.
Solution:
Enter the following SQL query:
SELECT T1.'Number', T1.'Employee', T1.'Position', CASE WHEN T2.'City' IS NULL THEN T1.'Location' ELSE T2.'City' END AS 'Location' FROM T1 LEFT JOIN T2 ON T1.'Employee'->toLowerCase() = T2.'Employee'→toLowerCase() |
Click Next
You can use FORMATWIKI function for the purposes of cell formatting. |
Solution for the advanced use case:
Enter the following SQL query:
SELECT T1.'Number',T1.'Employee',T1.'Position', CASE WHEN T1.'Employee' = "John Anderson" AND T1.'Location' IS NULL THEN (SELECT T2.'City' FROM T2 WHERE T2.'Employee' = "John Anderson") WHEN T1.'Employee' = "Alban Jacobs" AND T1.'Location' IS NULL THEN (SELECT T2.'City' FROM T2 WHERE T2.'Employee' = "Alban Jacobs") ELSE T1.'Location' END AS 'Location' FROM T1 |
Use case:
You have a table (a macro outputting a table) containing multiple columns with text data.
You need to calculate the number of distinct (unique) values by categories. For example, the number of unique customers in every segment.
Solution:
Enter the following SQL query (select the functions depending on what you'd like to calculate):
SELECT T1.'Segment', COUNT (DISTINCT (T1.'Customer Name')) AS 'Number of customers' FROM T* GROUP BY T1.'Segment' |
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Use case:
You have a table or a macro outputting a table.
You need to change the data format of the column containing numbers to add a dollar sign, a thousands separator into values and remove decimals.
Solution:
Enter the following SQL query:
SELECT 'Company', "$ "+FORMATNUMBER('Profit per month') as 'Profit' FROM T* |
FORMATNUMBER function allows you to format numbers according to the settings in the Table Transformer macro. |
You can use FORMATWIKI function for the purposes of cell formatting. |
Use case:
You need to find any values of the 'Customer Name' column that have "é" in any position.
Solution:
Enter the following SQL query:
SELECT * FROM T1 WHERE 'Customer Name' LIKE "%é%" |
LIKE "a%" - Finds any values that start with "a" |
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Use case:
You need to find the first four values in the range from 0 to 8 in an 'ID' column.
Solution:
Enter the following SQL query:
SELECT 'ID'->match("^[0-8]{4}") AS 'Year', 'Brand' FROM T1 |
The [0-9] expression is used to find any character between the brackets. |
Here you can find more info about JavaScript regular expressions. |
You can use FORMATWIKI function for the purposes of cell formatting. |
|
Use case:
You need to get time based on the time zones.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT *, FORMATDATE(DATEADD(hour, T1.'GMT' + (T1.'Created'::Date->getTimezoneOffset() / 60), T1.'Created')) AS 'My Time', FORMATDATE(DATEADD(hour, T1.'GMT' + ("today"::Date->getTimezoneOffset() / 60), NOW())) AS 'Current Time' FROM T1 |
Click Next.
Save the macro and the page.
The getTimezoneOffset() method returns the time difference between UTC time and local time, in minutes. |
The NOW() function returns the current date and time. The DATEADD() function adds a time/date interval to a date and then returns the date. The FORMATDATE() function converts time/dates to the specified in the Table Transformer macro settings date format. |
|
Use case:
You need to change a text for links and preserve it clickable.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT T1.'Company', FORMATWIKI( "[Click here|" + T1.'Link'->tfView->match("href=([^ >]*)")->1->slice(1, -1) + "]" ) AS 'Link' FROM T* |
Click Next.
Save the macro and the page.
Use case:
You need to count the number of issues by status and make reference to JIRA.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT 'Status', FORMATWIKI("["+ COUNT(*) +"|" + "https://jira.stiltsoft.com/issues/?jql=issuekey%20in%20(" + ARRAY(T1.'Key') + ")" + "]") AS 'COUNT' FROM T1 GROUP BY T1.'Status' UNION ALL CORRESPONDING SELECT "Total" AS 'Status', FORMATWIKI("["+ COUNT(*) +"|" + "https://jira.stiltsoft.com/issues/?jql=issuekey%20in%20(" + ARRAY(T1.'Key') + ")" + "]") AS 'COUNT' FROM T1 |
Click Next.
Save the macro and the page.
Use case:
You need to group Jira linked issues by types and preserve clickable links to Jira.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT FIRST(T1.'Linked Issues'->split("-")->0) AS 'Type', FORMATWIKI(SUM("[" + T1.'Linked Issues' + "|https://jsd.stiltsoft.com/browse/" + T1.'Linked Issues' + "]\\ ")) AS 'Issues' FROM T1 GROUP BY T1.'Linked Issues'->split("-")->0 |
Click Next.
Save the macro and the page.
Use case:
You need to merge two Jira Issue tables by linked issues (a comma separated list) from one table and issue keys from another.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT T1.'T',T1.'Key',T1.'Summary', CONCAT_VIEW_AGGR(FORMATWIKI(T2.'T' , " \n")) AS 'Type - linked issues', CONCAT_VIEW_AGGR(FORMATWIKI(T2.'Key', " \n")) AS 'Key - linked issues', CONCAT_VIEW_AGGR(FORMATWIKI(T2.'Summary', " \n")) AS 'Summary - linked issues', CONCAT_VIEW_AGGR(FORMATWIKI(T2.'Status', " \n")) AS 'Status - linked issues' FROM T1 LEFT JOIN T2 ON T1.'Linked Issues'->split(" , ")->indexOf(T2.'Key'::string) > -1 GROUP BY T1.'Key', T1.'T',T1.'Summary' |
Click Next.
Save the macro and the page.
A Javascript method in joing tables is used for splitting a comma-separated list of linked issues. |
The CONCAT_VIEW_AGGR funсtion is used for concatenation and aggregation table data preserving their original formatting. |
The FORMATWIKI funсtion is used for adding line breaks. |
The GROUP BY statement groups rows that have the same values into summary rows. |
Use case:
You need to apply custom formatting to a header of the Jira Issue table.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro, create a table containing only the Jira Issue table header formatted as you wish, and paste it along with the Jira Issue macro in the macro body.
Select the macro and click Edit.
In the Presets tab select Merge tables and click Next.
Save the macro and the page.
Use case:
You need to count the definite value in columns.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT "Red mark" AS '', SUM(IF(T1.'Time' = "RED", 1, 0)) AS 'Time', SUM(IF(T1.'Quality' = "RED", 1, 0)) AS 'Quality', SUM(IF(T1.'Customer Satisfaction' = "RED", 1, 0)) AS 'Customer Satisfaction' FROM T1 |
Click Next.
Save the macro and the page.
|
Use case:
You need to calculate the completion ratio based on the start, end dates of project phases.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT *, CASE WHEN 'Completion Ratio'>100 THEN "100%" WHEN 'Completion Ratio'<0 THEN "0%" ELSE ROUND('Completion Ratio')+"%" END AS 'Completion Ratio' FROM (SELECT *, DATEDIFF(DAY,'Start Date',"today")/ DATEDIFF(DAY, 'Start Date', 'End Date')*100 AS 'Completion Ratio' FROM T1) |
Click Next.
Save the macro and the page.
Use case:
You need to calculate the difference between monthly budget and actual expenses by categories and display the appropriate status: "Under budget", "Over budget", "On budget".
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT *, (T1.'Actual'- T1.'Budget') AS 'Difference, $', (T1.'Actual' / T1.'Budget' * 100) AS '% Budget', CASE WHEN (T1.'Actual' / T1.'Budget' * 100) < 100 THEN FORMATWIKI("{status:colour=Green|title=Under budget}") WHEN (T1.'Actual' / T1.'Budget' * 100) > 100 THEN FORMATWIKI("{status:colour=Red|title=Over budget}") ELSE FORMATWIKI("{status:colour=Yellow|title=On budget}") END AS 'Indicator' FROM T* |
Click Next.
Save the macro and the page.
Use case:
You need to look up tables by partial match.
Solution:
Switch the page to the edit mode.
Insert the Table Transformer macro and paste the table or the macros outputting tables within the macro body.
Select the macro and click Edit.
In the Presets tab select Custom transformation and click Next.
Enter the following SQL query:
SELECT * FROM T1 LEFT JOIN T2 ON T1.'Codes'->split("KR")->indexOf(REPLACE(T2.'Code', "KR", ""))>-1 |
Click Next.
Save the macro and the page.
Use case:
You need to PIVOT table data in Table Transformer.
Solution:
Enter the following SQL query:
SELECT * FROM T1 PIVOT (MAX('Value') for 'Month') |
The aggregation function MAX is applied to an existing column Value. The Month column is the column the data are aggregated by. |
The same output can be produced with the Pivot Table macro with versatile functions like MAX, MIN, SUM, etc., specifically designed for easy and accessible table data aggregation. |
Use case:
You need to UNPIVOT table data in Table Transformer.
Solution:
Enter the following SQL query:
SELECT * FROM T1 UNPIVOT ('Value' for 'Month' in (T1.'01-2021', T1.'02-2021', T1.'03-2021')) |
The UNPIVOT function is applied to the selection above and works with the table generated from it. In the function itself new custom columns - Value and Month - are created (column names can be adjusted). The Value column is filled with the data from the columns listed after in ('01-2021', '02-2021', '03-2021'). The Month column displays the relevant column names listed. |
Use case:
You are to aggregate headers from the Dev-stage 1 to Dev-stage 5 columns by their values and products.
Solution:
Enter the following SQL query:
SELECT 'Product', 'Value', ARRAY('Dev-stage') AS 'Dev-stage' FROM ( SELECT * FROM T1 UNPIVOT ('Value' for 'Dev-stage' in (T1.'Dev-stage 1',T1.'Dev-stage 2',T1.'Dev-stage 3',T1.'Dev-stage 4',T1.'Dev-stage 5'))) GROUP BY 'Product', 'Value' |
Enter the following SQL query:
SELECT * FROM T1 PIVOT (FIRST ('Dev-stage') for 'Value') |
Use case:
You need to split cell values in a column for further rows data aggregation.
Solution:
Enter the following SQL query:
SEARCH / AS @a EX('Skills'->split(",")) / RETURN(@a->'Name' AS 'Name', _ AS 'Skills') FROM T1 |
Save the macro and the page.
In this case the underscore in the query (i.e. _ AS 'Skills') is utilized as a beacon to return the transformed data in the Skills column, while @a -> returns the data corresponding to their row values, hence multipling them as the Skills column data obtain additional rows after being split. |
The resulting table can be further utilized with the Pivot Table macro for distinct value aggregation, counting and so on. |
Use case:
You have a table with the list of people responsible for publishing documentation pages.
You need to do the following:
Solution:
Enter the following SQL query:
SELECT FORMATWIKI("{color:" + IF(T1.'Responsible'= @CURRENTUSER, "green", "blue") +"}" + T1.'Responsible' + "{color}") AS 'Responsible', "@pageTitle - " + T1.'Page' AS '@pageTitle' FROM T1 |
Save the macro and the page.
@currentUser, @pageTitle variables are case-insensitive |
|
Use case:
You have a table with the date and the amount and need to show the amount increase by 4% from month to month.
Solution:
Enter the following SQL query:
SET @cnt = 0; SET @date = (SELECT T1.'Date' FROM T1); SET @amount = (SELECT T1.'Amount' FROM T1); WHILE @cnt < 11 BEGIN SET @cnt = @cnt + 1; SET @date = DATEADD(month, 1, @date); SET @amount = @amount * 1.04; INSERT INTO T1 (T1.'Date', T1.'Amount') VALUES (@date, @amount); END; SELECT * FROM T1 |
Save the macro and the page.
Use case:
You have a table with dates and prices and need to move the dates two weeks forward and the prices 20% up.
Solution:
Enter the following SQL query:
UPDATE T1 SET T1.'Date' = DATEADD(week, 2, 'Date'), T1.'Price' = ('Price' * 1.2); SELECT * FROM T1 |
Save the macro and the page.